Tony Heyblom
tony@unitedsodablasters.co.nz
Phone +64 7 5434596
Fax +64 7 5434597
Mobile +64 21 904 208
P.O Box 15-136,
Tauranga, New Zealand
221 Cheyne Road,
Tauranga, New Zealand
Soda Clean ltda.
www.sodaclean.us
Alexander Rottner, CEO
rottnerwerks@yahoo.com
011 57 2 222 4029
312 209 2225 cell
Cra. 5, #6-14
Bolivar, Valle del Cauca
Colombia, South America
NuTech Refinishing Inc.
www.NuTechSodaBlasting.com
Lanny Porter, Owner
nutechservice@alltel.net
Office: 706-367-8107
Cell: 770-480-6763
219 Summit Chase Dr.
Jefferson, GA 30549
MinneSodaWorks
http://minnesodaworks.com
Mike Schuette, Owner
schuettr@comcast.net
612-747-7669
3600 221st Ave NW
Oak Grove, MN 55303
Useful Documents
The following are links to PDF documents that we have developed over the years
Operating Instructions for the BB-100
Operating Instructions for the BB-100 Mobile
Operating Instructions for the BB-25
Post Job Handout
This is a flier we hand out with every completed job what explains any additional steps a client may need to take after a soda blasting job is completed.
Soda Removal Disclaimer
Contracts can be a good thing. This contract insures the client is aware of their responsibility to remove all blast residue before attempting to apply a new coating and protects us in case of their failure to do so.
Bottom Paint Removal
When Soda Blasting the hull of a boat your client needs to be aware of their responsibility to prepare the boat properly before your arrival on the job site. All openings through the hull must be sealed, the boat must be securely and safely blocked and there must be the proper amount of clearance and access for us to perform our work. This contract explains those details.
HoldTight 102 product data sheet
A bit more information is never a bad thing. We always like to hand out a Product Data Sheet to clients who will be using HoldTight 102 after we have left the site.
Cleaning and Salt* Removal with Hand / Power Tools and Hand Washing.
HoldTight 102 Application
When a client is going to be applying HoldTight 102 after we are done with soda blasting, we make sure they have a copy of the proper application instructions.
