|
|
|
Why Choose Soda Blasting To Strip Your Vehicle? |
 - No Metal Fatigue Or Warpage - Ever!
- No Damage To Glass, Rubber Or Chrome!
- Removes Undercoating Residue and Surface Rust!
- Baking Soda Is A Natural Rust Inhibitor - No Need to Immediately Prime
- Baking Soda Is Water Soluble - Instantly Dissolves!
- No Residue Problems In Small Passageways
- Our Baking Soda Is FDA Approved, Food Grade And Is Kosher!
- Baking Soda Is An All Natural, Biodegradable Blast Media
|
 Best results for automotive soda blasting is achieved on vehicles with the interior removed. This allows us to strip the door and trunk frames and jams without the worry of baking soda dust entering the passenger compartment. Additionally, vehicles without motors allows us to strip and clean motor compartments and firewalls. Undercarriages can be "sweep cleaned" of loose material if the vehicle is on an outdoor lift, but best results are achieved when the body is off the frame and installed on a rotisserie. Soda blasting is basically "line of sight" blasting. Nooks, crannies, wheel wells and compartmented areas can pose a challenge to the soda blast nozzle. Think of it as a fire hose nozzle, it works best pointed directly at the subject at hand.
As long as baking soda is on a ferrous metal surface, rust will not form. For rust to form, free moisture and an acidic condition must exist. In most cases, free moisture combines with carbon dioxide in the atmosphere to form carbonic acid. This acid releases a free metal (ferrous) ion, which combines with oxygen (oxidizes) to form rust. Baking soda buffers the acids, prevents the release of free metal ions and prevents rust. |
 A Special Note To Our Mobile Customers:
We require an outdoor location isolated from hazards like, houses, pools, automobiles, lawns, plants and shrubbery. The soda blast machine is very noisy (think jet engine) and the baking soda is dusty (think drywall dust or even smoke). Most of the baking soda will blow in the breeze and can lay on horizontal surfaces. Baking soda residue can not remain on automobile's and/or other items in the area and must be blown off at the end of the job or staining may occur. Baking soda residue can kill grass and vegetation by raising the pH of the soil, so it should be done over an area of little concern. Baking soda is a great, all natural grease/oil remover and should not be done over your asphalt driveway or the oil in the mix may come to the surface for a while.
In House Paint Stripping and Cleaning:
Our 7,000+ cu. ft. blast booth is located on Solomons Island Rd. (Route 2), Edgewater, MD. 21012. We are just 15 short minutes from downtown Annapolis, MD. and less than 15 minutes from MD. Route 50. Labor rates start at $160.00 per blast hour. Minimum charge for shop service is $175.00. Please note - this is our work site and not our corporate office location.
|
|
| Automotive Soda Blasting Gallery  Soda Blasting can be used on cars of all substrate types including steel, aluminum, fiberglass and composites. Best results can be achieved when projects have been stripped as much as possible and include antique, classic and street rod type vehicles. Here is a gallery of before and after pictures of many different autos being stripped using Soda Blasting.
Click here to find out more! |
| Soda Blasting a Corvette  This is an article on someone's experience soda blasting his corvette. It appeared in the magazine Corvette Restorer. If you are a Corvette aficionado then you will love this magazine.
Click here to find out more! |
410-271-2652
212 Najoles Rd. Bldg. D.
Millersville, MD. 21108 - New Location!
Please call for appointments
Soda Blasting by Chesapeake Soda Clean
Distributor of
the Buster Blaster Soda Blasting System
The only Patented, True Soda Blasting System
Designed and Manufactured
by The Soda Works!
All Contents © 2004 - 2007 Chesapeake Soda Clean
All rights reserved.
Site design by
Planet Chicken
|
|
